Here are the specs; length, 33 inches, width, 12 inches, depth 2.5 inches, Neck width 1.75 inches at nut, 2.2 inches at bridge. Cutaway allows access to 20th fret. Full 25 inch scale. Woods used are as follows; tops are Sitka spruce, sides are walnut, backs are myrtle or koa. Neck/headstock is maple, fredboard is katalox, bridges are any of a variety of exotic hardwoods, some unknown to me. I use a nitrocellulose satin finish. There is no binding, no inlays, nothing fancy. The saddles and nuts are fossilized mastadon ivory from Alaska. I use chrome Grover mini tuners. My name and guitar serial number are pencilled on the inside back and are visible through the larger soundhole.

MEDUSA specs Grover Mini Tuners Fossil Ivory Nut 1.75 Inch Width full 25" scale One piece neck/head stock, hollow to first fret Cutaway for access to 20 frets Exotic wood pickguard Side port for player enjoyment Fossil Ivory Saddle K&K Pure Western Mini Pickup

 

Twelve inches width, 2.5 inches depth at tail block.
Thirty three inches in length. (airline friendly)
Comfortable full size neck with 25" scale. Cutaway provides access to 20 frets.
K&K Pickup is passive, but needs no pre-amp.

Tops:	spruce
Sides and backs:	koa, mahogany, maple, myrtle, walnut
Fingerboard:	ziracote, katalox

*Pictured is koa back and spruce top, walnut sides, katalox fingerboard, BUO

 

 

 

Dot Ukulele
specs

Shown are Concert (left) and Tenor (right) sizes.

Neck/headstock is sepele or lyptus with maple stripe.

All necks are hollow from the first fret into the body cavity.

Bodies are walnut, koa, wenge. Tops can be the same wood as rest of body or Sitka spruce.

Fretboard and bridge can be maple, katalox, walnut.

Nuts and saddles are mastodon ivory, bone, plastic, stainless steel. (saddle only)

A K&K Twin Spot Internal pickup system is optional. ($110)